Function to skip through 10
tracks at a time
ENG
Press the +10 button briefly while playing back a
CD and MP3/WMA-CD . The track 10 tracks after the
current one will then be played back.
Example: If you want to select track 43 during playback of track 5,
press the +10 button four times, and then press the
button three times .
5
10
20
Remain Function
You can check the remaining time.
1
Press the REMAIN button .
◆
If you press the REMAIN button, the remaining time is
displayed.
2
To cancel this function, press the REMAIN button again.
12
30
40
41
42
Programming the Order of CD Playback
(This function is not available during playback of an MP3/WMA-CD.)
You can decide:
The order of the track desired to listen
The track not desired to listen
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
43
1
If the CD function is selected, stop the player by pressing
2
Press PROGRAM/SET.
Result: The following indications are displayed:
(01 = Program no., -- -- = Track no. on the disc)
3
Select the required track by pressing the
Press the
Press the
4
Press PROGRAM/SET to confirm your selection.
Result: The selection is stored and
5
To select other tracks, repeat Steps 3 to 4.
6
Press PLAY (
programmed.
7
When press
and press
◆
If you open the compartment or turn off the power,
the selection is cancelled.
◆
If you press the CANCEL button when you are setting,
the selection is cancelled.
,
button to move back through the tracks.
button to move forward through the tracks.
) to listen to the track selection in the order
button one time , compact disc player is stopped,
button again to cancel the selection.
1,7
3
3
2,4
3
3
1, 7
6
.
button:
is displayed.