Samsung SCX-465x Series User Manual page 141

Installing driver over the network
Command- line Definition
/o or Opens Printers and Faxes
folder after installation.
/O
/f"<log filename>" Specifies log filename.
or
The default log file is
/F"<log filename>" created in the system temp
folder if not specified.
/h, /H or /? Shows Command-line Usage.
7
Macintosh
1 Make sure that the machine is connected to your network and powered
on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Installer OS X icon.
4
Click Continue.
5
Read the license agreement and click Continue.
6
Description
This command will open
Printers and Faxes folder
after the silent installation.
It will create a log file to a
specified folder.
7 Click Agree to agree to the license agreement.
8 When the message which warns that all applications will close on your
computer appears, click Continue.
9 Click Continue on the User Options Pane.
If you have not set the IP address yet, click Set IP address and refer to "IPv4
configuration using SetIP (Macintosh)" on page 136. If you want to set the
wireless setting, refer to.
10 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
11 Enter the password and click OK.
12 Installing software requires you to restart your computer. Click Continue
Installation.
13 After the installation is finished, click Quit or Restart.
2. Using a Network-Connected Machine
141