Product Support Tools - Samsung SCH-1500 series Service Manual

5. Product Support Tools

5-1 General
These tools enable you to edit or transfer all the EEPROM data of SCH-1500 DBDM phone.
Equipment Required
¥ IBM compatible PC (above 386, 33MHz, 8MB
RAM, DOS 5.0, 500K of memory free to execute
program, and 1MB of disk space free for software
upgrade.)
¥ SCH-1500 DM cable
¥ SCH-1500 Battery
Connection
Connect the test jig to COM1 port on the PC and
connect the interface cable of the test jig to the
phone.
Caution : When you use the PST program with a
notebook PC, you might encounter some problems.
Check your serial port setup in your notebook PC
(see your notebook PC manual).
DonÕt worry about the serial port setup when you
use a desktop PC.
Samsung Electronics
Software Installation
1. Insert the PST floppy disk into drive (A:).
2. Create an appropriate directory to the drive (C:)
for PST software.
3. Copy all files of the drive (A:) to the directory
you made.
4. Execute PSTxx.EXE to run the PST program.
Note : There are three executable files in the new
directory you made:
PSTxx.EXE: PST program where xx is the PST
version number.
5-1