Xerox DocuPrint C1110 User Manual page 97

PCL
Specifies the settings for the PCL.
Item
Output Size
Orientation
Font
Symbol Set
Font Size
Font Pitch
Form Lines
Quantity
Image Enhance
HexDump
Draft Mode
Line Termination
Output Color
Sets the size of the paper to be used when printing.
• [A4] (default), [A5], [B5], [8.5 x 11"], [8.5 x 13"], [8.5 x 14"], [7.25 x 10.5"], [Env 3.9 x
7.5"], [Env 110 x 220mm], [Env 162 x 229mm], [Env 4.1 x 9.5"], [Custom Size]
Sets the print orientation to [Portrait] or [Landscape].
• [Portrait] (default)
• [Landscape]
Sets the font to be used when printing. (default: [Courier])
Sets the font for symbols. (default: [ROMAN-8])
Sets the font size. You can specify the value in increments of 0.25 pt.
• [4.00] to [50.00] (default: [12.00])
Sets the font pitch (number of characters per inch).You can specify the value in
increments of 0.01 cpi.
• [6.00] to [24.00] (default: [10.00])
Sets the form line (the number of lines per form). You can specify the value in
increments of 1.
• [5] to [128] (default: [64])
Sets the number of copies to be printed. You can specify the value in increments of 1.
• [1] to [999] (default: [1])
Sets whether to perform image enhancement.
Image enhancement is a feature that makes the boundary line between black and white
smoother to decrease jags and enhance the visual appearance.
• [On] (default)
• [Off]
Sets whether to print the data sent from a computer in ASCII codes corresponding to
the hexadecimal notation format in order to check the data contents.
• [Disable] (default)
• [Enable]
Sets whether to print in draft mode. This mode increases print speed but decreases
print quality.
• [Disable] (default)
• [Enable]
Sets the line termination control codes. Set how you want the printer to interpret CR, LF
and FF control codes.
• [Off] (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
• [Add-LF]
The LF command is added.
CR=CR+LF, LF=LF, FF=FF
• [Add-CR]
The CR command is added.
CR=CR, LF=CR+LF, FF=CR+FF
• [CR-XX]
The CR and LF commands are added.
CR=CR+LF, LF=CR+LF, FF=CR+FF
Sets the color mode. This settings is used when the color printing mode setting is not
specified for the print job that is sent to the printer.
• [Black] (default)
Prints in the black and white mode.
• [Color]
Prints in the color mode.
Description
5.2 Description of Menu Items
97