Power On Wizard - Fuji Xerox DocuPrint CM205 f User Manual

Job Tone
Alert Tone
Out of Paper
All Tones
• mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)*
Inches (")
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*

• Power On Wizard

Purpose:
To perform initial settings for the printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 50
Values:
Yes
No*
Off Does not emit a tone when a job is complete.
Min Emits a tone at the specified volume when a job is complete.
Middle*
Max
Off Does not emit a tone when a problem occurs.
Min Emits a tone at the specified volume when a problem occurs.
Middle*
Max
Off Does not emit a tone when the printer runs out of paper.
Min Emits a tone at the specified volume when the printer runs out
of paper.
Middle*
Max
Off Disables all the alert tones.
Min Sets the volume of all the alert tones at once.
Middle
Max
Specifies the default measurement unit.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Performs the initial settings for the printer.
Does not perform the initial settings for the printer.
Using the Operator Panel Menus and Keypad 338