Table of Contents
Advertisement
• Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes
effective after the printer is turned off and then on.
Values:
Auto*
10BASE-T Half
10BASE-T Full
100BASE-TX Half
100BASE-TX Full
NOTE:
•
This item is displayed only when the printer is connected with a wired network.
• Status (DocuPrint CM205 fw Only)
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator
panel to improve the status of the wireless connection.
Values:
Good
Acceptable
Low
No Reception
NOTE:
•
This item is displayed only when the printer is connected with a wireless network.
Detects the Ethernet settings automatically.
Uses 10base-T half-duplex.
Uses 10base-T full-duplex.
Uses 100base-TX half-duplex.
Uses 100base-TX full-duplex.
Indicates good signal strength.
Indicates marginal signal strength.
Indicates insufficient signal strength.
Indicates that no signal is received.
Using the Operator Panel Menus and Keypad
324
Advertisement
Table of Contents
