General Troubleshooting; Printer Does Not Turn On; The Printer Does Not Print - Xerox Phaser 3010 User Manual

Troubleshooting

General Troubleshooting

This section includes:

Printer Does Not Turn On ................................................................................................................................................. 36

The Printer Does Not Print ............................................................................................................................................... 36

Printer Resets or Turns Off Frequently ........................................................................................................................ 37
Printer is Making Unusual Noises .................................................................................................................................. 37
Condensation has Formed Inside the Printer .......................................................................................................... 38
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
Printer Does Not Turn On
Probable Causes
The power switch is not turned on.
The power cord is not correctly plugged into
the outlet.
Something is wrong with the outlet connected
to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
CAUTION: Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
The Printer Does Not Print
Probable Causes
The printer is in Energy Saver mode.
PrintingScout displays an error message.
36 Phaser 3010/3040 Printer
User Guide
Solutions
Turn on the switch.
Turn off the printer power switch, and plug the power cord securely
into the outlet.
Plug another electrical appliance into the outlet and see if it
operates properly.
Try a different outlet.
Use a power source with the specifications listed in the
Specifications on page 63.
Solutions
Push the control panel button.
Follow the instructions in the PrintingScout message to correct the
problem. If the error persists, contact your Xerox representative.
Electrical