Recording
Changing Flash Mode
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1
Select [Flash] in the [Rec] menu.
2
Touch [Flash Mode].
3
Touch the item.
Item
([Forced Flash On]) The flash is activated every time regardless of the recording
‰
([Forced On/
Red-Eye])
¢
([Slow Sync.])
([Slow Sync./
Red-Eye])
¢
Œ ([Forced Flash Off]) The flash is not activated in any recording conditions.
¢ You can adjust the flash output only when [Wireless] in [Flash] is set to [OFF].
The flash is activated twice. The interval between the first and second flash is
longer when [
flash is activated.
conditions.
•
Use this when your subject is back-lit or under fluorescent
light.
When taking pictures against a dark background landscape, this
feature will slow the shutter speed when the flash is activated. Dark
background landscape will appear brighter.
•
Use this when you take pictures of people in front of a dark
background.
•
Using a slower speed can cause motion blur. Using a tripod
can enhance your photos.
•
Use this when you take pictures in places where the use of
flash is not permitted.
•
Close the flash to turn it off when the built-in flash is used.
] or [
] is set. The subject should not move until the second
(P43)
Description of settings
141