Panasonic Lumix DMC-G6 Owner's Manual page 128

Recording
Setting the light source
∫
You can change the position and size of the light source.
1 ]
Touch [ .
2
Touch [ ] to display the setting screen.
•
You can also display the setting screen by pressing [Fn3].
3
Touch the location where you want to place the
center of the light source.
•
The position of the light source can also be moved with the
cursor button.
•
The center of the light source can be moved to the edge of
the screen.
Point for when placing the center of the light source
A more natural appearance can be created by placing the center of the light source
outside the image.
4
Pinch out/pinch in
source.
•
It can be changed to 4 different sizes.
•
Enlarge/reduce can also be performed by rotating the rear
dial.
•
Touching [Reset] returns the light source setting to the
default setting.
5
Touch [Set].
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
(P17) to adjust the size of the light
128