Recording
•
The Burst speed may become slower depending on the following settings.
–
[Picture Size] (P188)/[Quality] (P189)/[Sensitivity] (P154)/[Focus Mode] (P162)/
[Focus/Release Priority]
•
Burst speed can also be set with [Burst Rate] in the [Rec] menu.
•
Refer to
P189
4
Focus on the subject and take a picture.
•
Hold down the shutter button fully to activate the Burst
Mode.
Canceling the Burst Mode
∫
Select [
] (single picture recording) or [
(P178)
Focusing in Burst Mode
The focus changes depending on the setting for [Focus/Release Priority]
[Custom] menu and the setting for [Focus Mode]
Focus Mode
AFS
¢1
AFF/AFC
MF
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
(P170)
for information about RAW files.
Focus/Release
Priority
[FOCUS]
[RELEASE]
[FOCUS]
[RELEASE]
—
] from among the drive modes.
(P162)
in the [Rec] menu.
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
180
4:3
AFS
AFS
L
H
60 i
(P170)
in the
Focus
¢2
¢3