Monitor Settings - Nikon COOLPIX S2550 User Manual

Monitor Settings

d button M z (Setup menu) (A 126) M Monitor settings
Set the options below.
Photo info
Choose information displayed in the monitor during shooting and playback mode.
Image review
On (default setting): Picture is automatically displayed in the monitor
immediately after it is taken and the monitor display returns to shooting mode.
Off: Picture is not displayed after it is taken.
Brightness
Choose from five settings for monitor brightness. The default setting is 3.
Photo Info
Select whether or not the photo information is displayed in the monitor.
See "The Monitor" (A 6) for information on indicators displayed in the monitor.
Show info
Current settings and operational guides are displayed as in Show info above. If no
Auto info
operations are performed for a few seconds, the display will be the same as Hide
(default setting)
info. Information will be displayed again when the next operation is performed.
Hide info
Framing
grid+auto info
In addition to information shown with Auto
info above, a framing grid is displayed to help
frame pictures in A (auto) mode. In other
shooting modes only the information shown
with Auto info is displayed.
Shooting mode
4 4
4 4
Setup Menu
Playback mode
1 5 / 0 5 / 2 0 1 1 1 5 : 3 0 1 5 / 0 5 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G 0 0 0 4 . J P G
4 / 4 / 4 4
1 5 / 0 5 / 2 0 1 1 1 5 : 3 0 1 5 / 0 5 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G 0 0 0 4 . J P G
4 / 4 / 4 4
The current settings or
operation guide is
displayed, as in Auto
info above.
131