Operating the Blink Warning Screen
When the blink warning screen shown at right is
displayed in the monitor, the operations described
below are available.
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
Option
Enlarge the detected
face that blinked
Switch to full-frame
playback
Select the face to be
displayed
Delete the picture
Switch to shooting
mode
Use
g (i)
Rotate the zoom control to g (i).
f (h)
Rotate the zoom control to f (h).
If the camera detects that more than one human
subject blinked, press H, I, J or K with display
zoomed in to switch to another face.
l
Press the l button.
k
Press the k button or the shutter-release button.
Setup Menu
Did someone blink?
Exit
Exit
Exit
Description
141