Table of Contents
Advertisement
Monitor Settings
Press the d button M z menu icon M Monitor settings M k button
Option
Image review
Monitor options
EVF options
View/hide
framing grid*
View/hide
histograms*
* To display or hide these indicators, press the s (display) button when On is selected
(A7).
Using the Menu
The Setup Menu
Set whether or not to display the captured image immediately after
shooting.
Default setting: On
Adjust the monitor brightness and hue.
Use the multi selector HI to adjust brightness, JK to adjust hue
and then press the k button.
Default setting: Brightness 3, Hue 0
Cannot be set when the viewfinder is used.
Adjust the viewfinder brightness and hue.
Use the multi selector HI to adjust brightness, JK to adjust hue
and then press the k button.
Default setting: Brightness 2, Hue 0
Cannot be set when the monitor is used.
Set whether or not to display a boxed guide for framing on the
shooting screen.
Default setting: Off
The framing grid is not displayed during movie recording or when
the enlarged center of the image is displayed in E (manual
focus).
Set whether or not to display a graph that shows the brightness
distribution in the image (A10, 66) on the shooting screen.
Default setting: Off
Can be displayed only in the following shooting modes:
- When in j, k, l, or m mode (if Manual (spot), Manual
(normal), or Manual (wide) is selected in AF area mode)
- When in scene modes (except Easy panorama)
The histogram is not displayed during movie recording or when
E (manual focus) is selected.
Description
163
Advertisement
Table of Contents
