Getting Started; Charging The Battery; Set-Up - Alcatel 1010X User Manual

1

Getting started

1.1

Set-up

Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
1010X
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
.....................
(1)
13
1010D
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
it and slide it out.

Charging the battery

Connect the battery charger to your phone and mains socket
respectively.
• The charging may take about 20 minutes to start if the battery is flat.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The mains socket must be near to the phone and easily accessible (avoid
electric extension cables).
14