Picture controls (continued)
Black/White Level
Black/White Level increases the strength of dark areas of
the picture which improves the definition.
In the Picture settings menu press
1
Black/White Level is highlighted.
Picture settings
Sharpness
Black/White Level
Cinema mode
Film Stabilization
Active Vision M100
Colour Temperature
MENU
Back
EXIT
Watch TV
Press
or
to select between High, Off, Low
z
x
2
and Middle. The effect depends on the broadcast
and is most noticeable on dark colours.
Cinema Mode
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
In the Picture settings menu press
1
Cinema mode.
Press
or
to select On or Off.
z
x
2
NOTE: When a DVD with subtitles is being played
this mode may not work correctly.
Film Stabilization
The Film Stabilization feature allows the adjustment
of motion smoothness.
In the PICTURE menu press
1
Stabilization.
Press
or
to select Smooth, Standard or
z
x
2
Off.
e
until
2/3
0
High
On
Smooth
On
OK
to select
e
to select Film
e
26
Active Vision M100
When Active Vision M100 is selected this feature will
reduce 'smearing' and on video sources will reduce
picture judder.
In the PICTURE menu press
1
Vision M100.
Press
or
to select On or Off.
z
x
2
Colour Temperature
Colour Temperature increases the 'warmth' or 'coolness'
of a picture by increasing the red, green and blue tint.
In the Picture settings menu press
1
Colour Temperature is highlighted, press OK.
Press
or
to select between Cool, Natural
z
x
2
and Warm to suit your preference.
Picture settings
Colour Temperature
Red Level
Green Level
Blue Level
MENU
Back
EXIT
Watch TV
Press
and
to select a colour level, then
f
e
3
to adjust the settings.
x
Reset
Reset returns the television to the default settings.
In the Picture settings menu press Q to select
1
Reset.
Press OK.
2
to select Active
e
until
e
Cool
0
0
0
or
z