Picture Controls - Colour Temperature, 3D Colour Management, Base Colour Adjustment - Toshiba WL66 Series Owner's Manual

Colour temperature
Colour Temperature increases the 'warmth' or 'coolness'
of a picture by increasing the red or blue tint.
In the Picture settings menu press down until
1
Colour Temperature is highlighted.
Picture settings
Black stretch
MPEG NR
DNR
Colour Temperature
Back Watch TV
MENU EXIT
Press left or right to select between Normal,
2
Warm and Cool to suit your preference.
3D Colour management
When 3D Colour management is selected it allows the
'Base colour adjustment' feature to become available.
In the PICTURE menu press down to select
1
3D Colour management.
PICTURE
Picture settings
3D Colour management
Base colour adjustment
Cinema mode
Back Watch TV
MENU EXIT
Press left or right to select On or Off.
2
Picture controls
2/2
On
Off
Auto.
Normal
OK
On
OK
Off
18
continued
Base colour adjustment
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
In the PICTURE menu press down to select
1
Base colour adjustment, then press OK.
PICTURE
Picture settings
3D Colour management
Base colour adjustment
Cinema mode
Back Watch TV
MENU EXIT
Press up and down to select an option, then
2
right to adjust the settings.
Base colour adjustment
Hue
Red +2
Green 0
Blue 0
Yellow 0
Magenta 0
Cyan 0
Reset
Back Watch TV
MENU EXIT
To return to the original factory settings select
Reset and press OK.
OK
On
OK
Off
Saturation Brightness
+6 +4
0 0
0 0
0 0
0 0
0 0
OK