Table of Contents
Advertisement
Channel Plan
CH Indication
02 ~ 12
13 ~ 20
21 ~ 69
74 ~ 78
80 ~ 99
100
121 ~ 141
This VCR will receive Hyper and Oscar bands.
7. Press [STATUS/EXIT] to exit.
To Skip the Channel
The channels you no longer receive or seldom use
can be skipped from access by [CH. (K/L)].
5-a). Press [PLAY/K] or
[STOP/p] to select
"SKIP", then press
[F.FWD/B] to select
[ON].
• You press [F.FWD/B]
again, [ON] will change to [OFF]. The
channel is memorised again.
5-b). Press [STATUS/EXIT] to exit.
Channel Change
You can replace two channels.
3-a). Press [PLAY/K] or
[STOP/p] to select
"MOVE", then press
[F.FWD/B].
3-b). Press [PLAY/K] or
[STOP/p] to select the
channel number you want to change, then
press [F.FWD/B].
3-c). Press [PLAY/K] or [STOP/p] to select
another channel number, then press
[F.FWD/B].
3-d). Press [STATUS/EXIT] to exit.
TV Channel
E2 ~ E12
A ~ H (only ITALY)
E21 ~ E69
X, Y, Z, Z+1, Z+2
S1 ~ S20
S52
S21 ~ S41
MANUAL
PROG.
P55
CHANNEL
55
SKIP
[ON]
SELECT op CHOOSE B
END=EXIT
MOVE
P01: 02
P06: 90
P02: 03
P07: 99
P03: 05
P08: 121
P04: 10
P09: 124
P05: 74
P10: 130
SELECT op CHOOSE B
END=EXIT
Setting the Clock
Make sure ...
• You must use the remote control for this proce-
dure.
Set the clock accurately for proper automatic
timer recording.
1. Press [VCR].
2. Press [MENU].
3. Press [PLAY/K] or [STOP/p] to select "INI-
TIAL SET UP", then press [F.FWD/B].
4. Press [PLAY/K] or
[STOP/p] to select
"CLOCK", then press
[F.FWD/B].
When you enter the clock;
• Enter a 0 before a single digit number.
• Entries that do not match the VCR's internal
calendar will cause a question mark (?) to
appear on the TV screen.
• Press [CLEAR] to go back one step from cur-
rent step.
5. Press number buttons to
enter your desired HOUR,
MINUTE.
6. Press number buttons to
enter your desired DAY ,
MONTH and YEAR.
7. Press [STATUS/EXIT].
The internal clock starts and the normal TV
screen resumes.
NOTE:
When unplugging the mains cord or if there is a
power failure for more than one minute, you
may have to reset the clock.
- 8 -
SELECT op CHOOSE B
CLOCK
RF OUT
LANGUAGE
END=EXIT
TIME
15:27
DATE 28/10/01
SUN.
CORRECT = CLEAR
END = EXIT
EN
Advertisement
Table of Contents
