Table of Contents
Advertisement
4.
SPECIAL FEATURES
Tuner mode
You can also use your video recorder as a TV receiver
(tuner).
STOP h
1
Hold the
button, until
display.
2
select the required programme number with the
P q
button or with the
3
Switch the video recorder to standby by pressing the
STANDBY m
button when you no longer want to watch
television.
Sound track selection
You can select the required sound track during tuner-mode,
stop or playback. This is of particular interest when the audio
transmissions are multilingual.
1
SELECT
Press the
button. The current setting will appear
in the display. By pressing the
times you can select from the four possibilities displayed
('STEREO' ,'RIGHT' ,'LEFT' ,'MONO' ).
Note: During playback you can select a fifth possibility:
the 'MIXED' mode. In this mode you can play back the
mono sound of the normal (linear) audio track together
with the sound of the stereo audio track. This can be
used for playing back a recording dubbed on another
video recorder.
* If there is no stereo sound recorded on the cassette,
the video recorder automatically switches over to mono
sound.
Changing the TV system
If you play back recordings made on other video recorders or
if you record from an external source, the automatic TV
system switch-over may not always work properly.
1
Before recording, or during playback, select the TV
SYSTEM
system with the
2
If you select a different programme number, or eject the
cassette, the video recorder switches back to 'auto-
matic'.
10
appears in the
P r
0-9
buttons.
SELECT
button several
button.
Externally controlled TIMER recording
Do you have another device, e.g.: a satellite receiver, which
can control other equipment by a Programming function? This
video recorder can be remote-controlled via socket
, by means of a scart cable.
1
or
Insert a cassette. Switch to standby with the
STANDBY m
button.
2
MONITOR
Hold the
display.
3
If you want to interrupt this function before the recording
has actually started, hold the
'REC.P' disappears from the video recorder display.
4
If you want to interrupt this function while a recording is
being made, press the
On Screen Display (OSD)
You can switch the On Screen Display (OSD) on or off.
1
AUTOINSTALL
Press the
2
Select and confirm 'OSD' .
3
Select and confirm 'ON' or 'OFF' .
OK
Note: With the
actual operating mode on the TV screen.
Setting the clock
1
Press the
AUTOINSTALL
2
Confirm the line 'CLOCK' .
3
Adjust 'TIME' , 'YEAR' , 'MONTH' , 'DATE' if required.
4
Confirm each entry.
button until 'REC.P' appears in the
MONITOR
button until
STANDBY m
button.
button on the video recorder.
button you can superimpose the
button on the video recorder.
EXT.2
Advertisement
Table of Contents
