Checking The Recording During Recording (Time Slip) [A]; Watching The Television While Recording - Panasonic DMR-E20 Operating Instructions Manual

TOP
WINDOW
TV
VOL
TV/AV
1
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE
CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
A
TIME SLIP
(1)
TIME SLIP
(1) Current recording
(2) Play images (30 seconds before)
B
1 2

Checking the recording during recording (TIME SLIP) [A]

[RAM]
You can play the programme being recorded to check that it is being recorded correctly. You can
also check parts that were recorded previously.
RETURN
ENTER
Preparation
Switch [DVD, TV] to "DVD".
While recording or timer recording
2
Press [TIME SLIP].
Play starts 30 seconds previous. For 5 seconds the play images are shown together with the
recording.
The play images are shown in full once 5 seconds have passed.
ªTo change the part being played [B]
Main unit only
1) Turn [TIME SLIP] on the main unit.
≥Turn up to increase in one-minute units.
≥Turn down to decrease in one-minute units.
2) Press [TIME SLIP] on the main unit within 5 seconds to enter the time.
Play starts from the time you entered.
Note
You cannot change the position being played with the remote control.
ªTo show both the recording and play images
Press and hold [TIME SLIP] for about 3 seconds.
≥The picture-in-picture(2) screen becomes a full screen(1) if you perform play function other
than normal play.
ªTo stop play and recording
1) Press [∫, STOP]. Play stops.
Wait 2 seconds.
2) Press [∫, STOP]. Recording stops.
≥You cannot stop recording with [∫, STOP] during timer recording. To stop timer recording,
press [Á, TIMER REC].
For your reference
≥If you fast-forward, rewind, or skip during Time Slip, only the play images are shown.
≥The sound for the images being played is heard during Time Slip.

Watching the television while recording

Preparation
(2)
Switch [DVD, TV] to "TV".
1
Press [TV, TV/AV] to change the input mode to " TV" .
Press [TV, W, X] to change channels.
2
≥You can also select the channel with the numeric buttons.
For your reference
≥You can also do this if the unit is making a timer recording.
≥The recording is unaffected.
Playing while you are recording (continued)
29