Panasonic DMR-E20 Operating Instructions Manual page 36

TV
VOL
TV/AV
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
5
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV SETUP
REC
Á
4
Press [ENTER] when you have finished making changes.
≥To continue programming:Repeat steps 2, 3, and 4.
5
Press [PROG/CHECK] or [RETURN].
ªFlexible recording mode (FR)
≥The unit automatically selects a recording mode between "XP" and "EP" that will enable the
timer recording to fit in the available recording time on the disc with the best possible recording
4
quality.
5
≥This only works with timer recordings.
≥It may not be possible to record to the finish of the programme if the remaining time doesn't
allow.
≥This does not work with PDC.
To put the unit on recording standby
Press [Á, TIMER REC].
Ensure "Á" lights on the unit's display.
To change the timer recording programme
1) While the Timer Programme List Screen is being shown, use the joystick [3, 4] to select the
programme you want to change, and press [ENTER] to show the Timer Programme
Correction screen.
2) Move through the items with the joystick [1] and change the settings with the joystick [3, 4]
and press [ENTER].
To clear a timer recording programme
Press [CANCEL] while the programme's Timer Programme Correction screen is being shown.
Alternatively, use the joystick [3, 4] to select the programme in the Timer Programme List
screen and press [CANCEL].
≥You can not delete programmes that are currently recording.
Note
≥If the disc is protected or full, the unit switches to standby but does not go on standby for
recording. Check the disc carefully.
≥The built-in clock employs 24-hour system.
≥The remaining time is not shown if you insert discs other than DVD-RAM or DVD-R.
≥The remaining time displayed is calculated based on the current recording mode.
≥Approximetely 30 seconds at the beginning of subsequent programmes is not recorded when
use timer recording to record multiple programmes to a DVD-R.
≥Recording is not possible unless you set "Disc Protection" in "DISC INFORMATION" to "Off".
≥You cannot record to a disc if the write protect tab on a cartridge disc is set to protect. Release
this before operation (page 90).
≥If the unit is not put in the timer recording standby mode at the latest 10 minutes before the
programmed timer recording starting time, the [Á] flashes on the unit display. In this case,
press the [Á, TIMER REC] button to put the unit in the timer recording standby mode.
36
Timer recording (continued)