Engine oil level check
(JTD versions only)
By turning the ignition key to the MAR
position, the Infocenter display will show the
engine oil level display for about 3 seconds.
During this phase, to clear the display and
move to the following screen, press
WARNING To ensure correct reading of
the engine oil level, the check must be car-
ried out with the vehicle on level ground.
70
The following display in fig. 90 refers to
correct engine oil level. As the oil level grad-
ually falls, the full bars go off leaving room
for the empty bars.
ç
.
fig. 90
The following fig. 91 and fig. 92 re-
fer to the display with an oil level below the
foreseen minimum. Under this condition, the
bars are all empty with symbol and warn-
ing messages.
fig. 91
A0B2129g
fig. 92
A0B2134g
A0B2135g