Selespeed Gearbox Hydraulic System Oil - Alfa Romeo 156 Owner's Manual

SELESPEED GEARBOX
HYDRAULIC SYSTEM OIL
(fig. 13)
The oil level of the Selespeed system
should be carried out with the car on a lev-
el surface and with the engine stopped and
cold.
To check the level, proceed as follows:
– turn the ignition key to MAR;
– disconnect the breather tube and re-
move the cap (A) checking that the level
corresponds with the MAX mark on the dip-
stick of the actual cap;
– if the level is below the MAX mark, top
up with oil until reaching the correct level;
– after screwing the cap back on, insert
the breather tube completely on the cap
spout and turn the ignition key to STOP.
fig. 13
Do not add oil with dif-
ferent characteristics than
those of the oil already in
the system.
Used gearbox oil contain
pollutants. Contact Alfa
Romeo Authorized Services
to have the oil changed as these
are equipped to dispose of the
waste oil respecting the environ-
ment and laws.
A0B0162m
WARNING
When the engine is hot,
take care when working
inside the engine compartment to
avoid burns. Remember that when
the engine is hot, the fan may cut
in: danger of injury.
259