Alfa Romeo 156 Owner's Manual page 141

For 2.5 V6 24V versions and Diesel ver-
sions, to engage reverse gear (R), it is nec-
essary to wait for the car to be stationary,
then raise the ring under the grip (with the
fingers of the same hand holding the lever).
After engaging reverse gear, release the
ring. It is not necessary to raise the ring on
the lever when shifting from reverse to an-
other gear.
140
WARNING Reverse gear can only be en-
gaged with the vehicle completely stopped.
With the engine running, before engaging
reverse gear it is necessary to wait for at
least 3 seconds with the clutch pedal fully
pressed, to avoid grating and the possibil-
ity of damaging the gears.
WARNING
To change gear smoothly,
the clutch pedal must be
fully depressed. Therefore, there
should be no hindrances under the
pedal unit. Make sure that any
mats are well laid and do not in-
terfere with the pedals.
Do not drive with your
hand resting
gearshift lever, since the
applied pressure, though slight,
may, with the passing of time,
damage parts inside the gear.
on the