Rearscreen Wiper–Rearscreen Washer; Changing The Blade; Spray Jet - Alfa Romeo 156 Owner's Manual

REARSCREEN WIPER –
REARSCREEN WASHER
OPERATION (fig. 10)
This is only possible with the ignition key
at MAR.
To operate the rearscreen wiper turn the
knob (A) to position ' . The rearscreen
wiper works intermittently.
Pushing the lever (B) forwards the
rearscreen washer jet comes into operation
which is disengaged when the lever is re-
leased.
With the rearscreen washer, the wiper
comes into operation automatically for a few
seconds.
fig. 10

CHANGING THE BLADE

(fig. 11)
The rearscreen wiper blade should be re-
placed together with the arm.
To replace:
– mark the position of the blade in rela-
tion to the rearscreen.
– Raise the lid (A), slacken the nut (B)
and remove the arm (C).
– Correctly posiiton the new arm and firm-
ly tighten the fastening nut.
– Lower the lid.
A0B0081m
fig. 11
SPRAY JET (fig. 12)
If the jet does not spray, check that there
is fluid in the windscreen washer reservoir:
see the corresponding paragraph in the chap-
ter "Car maintenance". Then check that the
holes on the jet (A) are not clogged and
free them using a pin, if necessary.
A0B0082m
fig. 12
A0B0083m
281