Table of Contents
Advertisement
RAID Function
errors thatRAID Function detects — a data mismatch between the primary
and secondary drive, a physical media error on source or target drive, or a total
disk failure. The options for handling Errors are as follows:
Abort: stops any Synchronization or Rebuild process if an error is encountered.
Fix: in most cases, RAID Function automatically can correct errors. The
method of correction varies depending on the type of error.
Ignore: RAID Function will log the event error and continue the rebuild or
synchronization process. Use this setting if you want to detect the presence of
errors, but do not want to fix these errors at the time. The user may then
decide what to do about the error(s) detected..
WARNING: This may result in mismatched drives under RAID 1.
Interactive: By checking this option, a selection window will appear each time
an error is detected asking the user whether they want to Abort, Fix, or Ignore
the error (see Troubleshooting section).
Dismiss Error Dialogs designates the length of time (in seconds) that a Message
box or Error Dialog box appears on screen.
Scheduling Array Synchronization
This section of the Options Window allows a user to schedule when and how often
RAID Function will perform synchronization maintenance of a mirrored array.
Disable checkbox is checked (the default) to turn off automated scheduling of
synchronization. When unchecked, the Scheduling section will be highlighted
(see above).
4 4
Advertisement
Table of Contents
