Channel:ID
Channel:ID
Channel:ID
1 :Master
2 :Master
4.
Use the arrow keys to choose which drive contains the existing data to
be copied.
5.
Press [Ctrl-Y] keys to Save selection and start duplication. The following
progress screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N – Abort
6.
Select "Y" to continue. If you choose "N" , you will be returned to step 1.
7.
Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system
8. Proceed to the Installing Driver chapter on
RAID Function
Source Disk
Drive Model
Target Disk
Drive Model
[Please Select A Source Disk]
Drive Model
QUANTUMCR8.4A
QUANTUMCR8.4A
[ ] Up [ ]
[ESC] Exit
Array has been created.
<Press Any Key to Reboot>
driver and/or operating system.
[Ctrl-Y] Save
page 21
1 1
Getting Started
Capacity (MB)
Capacity (MB)
Capacity (MB)
8063
8063
to install the