Table of Contents
Advertisement
RAID Function
4-2-2 Windows 95
1.
After installing the RAID Function controller and configuring the hard drives,
partition and format your hard drive(s), if necessary.
2.
Install Windows 95 normally.
3.
After installation, go to the "Start" menu and choose "Settings."
4.
From the "Settings" menu, choose "Control Panel."
5.
In the "Control Panel" window, double-click on the "System" icon.
6.
In the "System" window, choose the "Device Manager"tab.
7.
In the hierarchical display under "Other Devices" is a listing for "PCI Mass Storage
Controller." Choose it and then press the "Properties" button..
8.
Choose the "Driver" tab in the "Properties" window, and then press the "Update
Driver" button.
9.
When asked if you want Windows to search for the driver, choose "Yes
(recommended)."
10.
Insert the "RAID Function Driver" diskette into the A: drive, then press
"Next."
11.
When Windows informs you that it was unable to find the drivers, press "Other
Locations..."
12.
In the "Select Other Location" dialog box, type "A:\WIN95-98".
13.
Press the "Next" button. A message informing you that Windows 95 has found
"Win95-98 Promise MBFastTrak133 Lite (tm) Controller" should appear.
14.
Press "Finish." (If Windows can't find the "MBFastTrak133 Lite.MPD" file, type
"A:\WIN95-98" in the "Copy files from:" text box).
15.
Choose "Yes" when asked if you wish to restart the system, and remove the
diskette..
2 4
Advertisement
Table of Contents
