Calibrating Your Screen - Epson Scan Server User Manual

Calibrating Your Screen

You need to calibrate your screen so that scanned images will be
reproduced on the screen as closely as possible to the original.
2
During the installation of EPSON TWAIN Pro Network software,
the calibration utility automatically starts and you can calibrate
your screen at that point.
To manually start the calibration utility, click Start on the
Windows taskbar and select Settings -> Control Panel. Then
double-click the EPSON TWAIN Pro Network Setup icon and
click the Calibration Utility icon in the EPSON TWAIN Pro
Network Setup dialog box.
The Screen Calibration dialog box appears.
To calibrate your screen follow the steps below:
1. Move the slider to the right or left until the shades of gray of
the two sets of horizontal stripes match.
2-15
Installing the Software