Using The Search Screen - Epson EasyMP Multi PC Projection Operation Manual

Connecting to the Projectors

Using the Search Screen

When you start EasyMP Multi PC Projection, the following search screen is
displayed.
A
B
C
D
A
Automatic search
Searches for the projectors on the network to which the computer is connected.
s "Automatic search" p.17
B
Manual search
Searches for the projectors on the network by specifying the projector's IP
address or projector name.
s "Manual search" p.18
C
Profile
Searches for the projectors on the network by using the projector information
saved previously.
s "Profile search" p.18
D
Profile list
Displays the registered profiles (projector information).
When you double-click the profile, the projectors registered in the profile is
searched for on the network.
s "Profile search"
L
E
Set options
K
Displays the Set options screen.
s "Set Options"
F
Join
J
Connects to the selected projectors.
G
List of Connected Projectors
Displays information on the projectors selected from the Projector List. Even if
I
the search mode is changed, the content of the List of Connected Projectors
H
remains the same.
G
H
Register
Registers the projectors from the List of Connected Projectors to a profile.
F
s "Registering a Profile"
E
I
Clear list
Clears information displayed in the Projector List and the List of Connected
Projectors.
J
Projector List
Displays a list of the projectors found on the network. You can then select
projectors to connect.
The search results for each search mode (Automatic search, Manual search, and
Profile) are displayed in separate lists.
The status of each projector is indicated by an icon.
p.18
p.40
p.27
Standby Available. You can connect to the projector.
Busy Available. Although other computers are
connected to the projector, you can also connect
at the same time.
16