Timer Recording Using Videoplus - Daewoo DVT-14H3UB Instruction Manual

R E C O R D I N G
c a s s e t t e s
12
For timer recordings, clock, date, and stations must be set correctly (page 5).
Load a cassette with its safety tab in place (see page 10) and with sufficient free
space for the recording.

Timer recording using VideoPlus+

0 1 / 0 1 / 2 0 0 1
0 - 9
CLEAR
SV/V+
No Pr
1 01
2
3
4
5
6
VW
CB
MENU : Previous
If you have not set the clock, when you press the VideoPlus+
button to set timer recording, the set will automatically change to the "CLOCK"
menu.
If you don't have the VideoPlus+ numbers see page 11 for the normal timer.
If you have made a mistake, move back to the relevant position with the C
button and change the setting.
During recording you can switch the screen off by pressing
The screen will indicate if the station is not programmed (page 5~7).
In the case of error messages, correct the input or check the date and time on
your televideo (also check your TV guide).
Call the VideoPlus+ menu
using SV/V+ button.
Video Plus+
---------
From your TV magazine, type
1 3 : 5 7
in the number next to the
: Digit Entry
programme you want to
: Store
: Delete
: Exit
record. (Digit key)
Confirm (
If you press the
Timer programme
Timer Programme menu will
Date Start End PDC SP/LP
05 14:18 17:15 Off SP
-- -- --:-- --:-- Off SP be displayed.
-- -- --:-- --:--- Off SP
-- -- --:-- --:--- Off SP
-- -- --:-- --:--- Off SP
-- -- --:-- --:--- Off SP
If you want to change data,
: Change CLEAR: Delete
: Select : Store
Press
Confirm (
button)
button,
buttons.
VW
button)
button.