Page 3
W O R T H Please keep the televideo machine’s guarantee card receipt safe for warranty purposes. k n o w i n g Precautions Read carefully through this manual to familiarise yourself with this high quality televideo. Make sure the rating of your household electricity supply matches that shown on the back of the televideo.
W O R T H Before doing anything with the televideo, please read the chapter “initial installation”. Contentss Controls The remote control unit The front panel’s button, On screen display Initial installation Connecting up the televideo, Fitting the remote control’s batteries Setting time and date, Language selection Auto setup, Manual tuning, Fine tuning, Edit Playing cassettes...
The remote control is the principle means of control, but the main playback and C O N T R O L S record functions are also available on the front of televideo. The remote control unit To switch televideo on and off (stand by) Sound on/off Digit key 0/ATK : Auto tracking.
C o n t r o l s The front panel’s button ON/OFF PLAY STOP/ EJECT STAND REC/ T.REC VIDEO AUDIO VIDEO VOL/ PR. PLAY Power Remote UP/DOWN on/off sensor REW/REV AUDIO CURSOR : CB VW FF/CUE AC ON/OFF Indicator HEAD PHONE STOP/EJECT ST-BY : Stand by led(Red)
Please place your televideo Horizontally on a flat, steady base so that air can circulate around it for ventilation. I N I T I A L Away from humidity and heat, magnetic fields, such as those from loudspeakers etc. and with no heavy objects placed on top. i n s t a l l a t i o n Connecting up the televideo Switch off all components when connecting or disconnecting cables.
Press the main power switch on the front panel INSTALLATION to turn on the set and then press button. Language, Country selection menus will be displayed. Setting time and date Call up the televideo menu. Clock And move the cursor down to the “Clock” line. Clock set Place the cursor to “Clock:”...
I N I T I A L If you want to use AV(Audio Video input) from satellite, DVD or CAMCORDER instead of RF(ANT input). Press the button . i n s t a l l a t i o n Auto setup(Automatic tuning system) Select the Install menu from the menu.
Page 11
INSTALLATION Edit The Edit menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences. Moving the channels Edit Position the cursor to Pr. No. to move and press the SLEEP button. Name Skip ----- C52...
P L A Y I N G Your televideo is switched on by the main power switch on the front panel and by button. c a s s e t t e s Playing back Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up.
C A S S E T T E S Your televideo is switched on by the main power switch on the front panel and by the button. Variable picture search Start from playback you can control search speed in 2 steps either forwards (F) or backwards (G).
R E C O R D I N G Your televideo is switched on by the main power switch on the front panel and by button. c a s s e t t e s Simple recording - REC Choose the station whose L STOP Pr 01 ARTE 00:12:34...
For timer recording, clock, date, and stations R e c o r d i n g must be set correctly. Load a cassette with its safety tab in place and with sufficient free space for the recording. C A S S E T T E S To enter station numbers using the cursors VW .
For timer recordings, clock, date, and stations must be set correctly (page 5). R E C O R D I N G Load a cassette with its safety tab in place (see page 10) and with sufficient free space for the recording. c a s s e t t e s Timer recording using VideoPlus+ Call the VideoPlus+ menu...
Your televideo automatically sets an electronic marker (index) at the beginning of each F U N C T I O N S recording and timer recordings. It is these markers which are detected by the index function. INDEX +/- Press the button depending on the number of recordings (index marks) that you wish to wind forward.
M O R E f u n c t i o n s Cassettes Use only good quality tape cassettes with the VHS logo. Keep cassettes away from excessive moisture or dust, magnetic and electrical fields eg. (loudspeakers and computers). Always wind the tape to the beginning when you have finished.
F U N C T I O N S You can program your televideo so that it switches on and/or off (with the selected station) at a time you want. Wake up Choose “Miscellaneous” from the “main menu”. Wake up Press CBVW buttons to adjust to desired wake up time Wake up and Pr.
M O R E f u n c t i o n s Teletext (Option) SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green,yellow and cyan field is shown at the bottom of the screen.
Connections ASSEMBLING Switch off all components when connecting or disconnecting cables. Copying To copy to your televideo from another video machine, connect the two machines with a scart cable between their AV sockets and select as programme “AV” (using the button).
Connections and ASSEMBLING Scart socket This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD. In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode. If not, press the AV button on the remote controller.
Before requesting service Mains supply – The mains lead is not connected to the wall socket. the televideo’s power indicator does not – Condensation may have formed when moving the televideo light your televideo doesn’t work from a cold to a warm room. Wait until the video reaches room temperature.