Timer Programme, Auto Tracking - Daewoo DVT-14H3UB Instruction Manual

For timer recording, clock, date, and stations
must be set correctly.
Load a cassette with its safety tab in place and
with sufficient free space for the recording.
To enter station numbers using the cursors VW .
Timer programme
No. Pr. Date Start
1
2
3
4
5
6
VW
CB
MENU : Previous
You can switch your televideo off during recording using the
main power button (ON/OFF) on the front panel of the set.)
The televideo will switch on and off automatically to record the timer event.
If you have made a mistake, move to the position you want to change using the VW
CB button and change the setting.
The recorder will eject cassettes which have the safety tab removed.
You cannot access "Install menu" when "Timer porgramme" is setting. That means, if
you want to access "Install menu", you should delete all data in "Timer programme".
Select the programming to erase or change If you want to erase this programming
press button CLEAR.
Auto tracking
If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again.
If you wish to record from a satellite receiver select under "Pr" the satellite programme
location or AV (depending on the connection with the aerial cable or a SCART cable.)
NB : Leave the satellite tuner switched on and to the programme you want to record.
Choose"Timer programme".
Timer programme
End PDC SP/LP Select a free timer memory.
01 05 14:18 17:15 Off SP
--- --- --:-- --:-- Off SP
--- --- --:-- --:--- Off SP
--- --- --:-- --:--- Off SP
Set ......
--- --- --:-- --:--- Off SP
--- --- --:-- --:--- Off SP
- Pr.No
: Change CLEAR: Delete
: Select : Store
- The date (date, daily = osd is displayed "day", sun~ sat)
- Start and end time.
- The recording speed.
R e c o r d i n g
C A S S E T T E S
button.(Don't use the
11