Chapter 5 : Using Timer Functions; Setting The Clock Automatically - Daewoo DVQ 14H1FC Instruction Manual

Daewoo electronics tv/vcr combination instruction manual dvq 14h1fc, dvq 20h1fc, dvq 14h2fc, dvq 20h2fc

Hide thumbs

Table Of Contents

Table of Contents

C H A P T E R

Using Timer Functions

Your TV/VCR has a built in-clock, and you can set the TV to turn on and off at times that you

select. You can also set your TV to turn off after counting down a certain amount of time.

Setting the Clock Automatically

Your TV/VCR can automatically set its internal clock using a signal from a local PBS station.

If you complete the following procedure, and your local PBS station is sending a time signal,

then your TV/VCR will always show the correct time.

1. With the TV turned on, press the MENU button until "Time" menu is displayed.

2. The "Set Clock" item will be selected. Press the VOLB button twice, then "Auto" will be

displayed in RED.

3. Press the xCHy buttons to display the "Auto Current Time Set" mode.

4. Use the xCHy buttons to set the PBS channel. If you don't know the channel of the local

PBS station, to set "Automatic"

5. Use the VOLB button to select "Time Zone".

6. Press the xCHy buttons to select that corresponds to the time zone where you live. If you

don't know the time zone where you live, to set 'Automatic".

Press the xCHy buttons to change the Time Zone.

Automatic

Alaska

7. Use the VOLB button to select 'DST" (Daylight Savings Time).

8. Press the xCHy buttons to select DST "Automatic" "ON" "OFF". (See the table blow)

Automatic

9. Press the L MENU button to exit.

10. To activate the Automatic Clock setting, press the POWER button to turn off your TV/VCR.

Leave the TV/VCR off for 4-5 minutes. When you turn the TV/VCR back on, the automat-

ic clock should be set.