Air Conditioning System (If Equipped); System Operating Instructions - MARUTI SUZUKI Alto Owner's Manual

INSTRUMENT PANEL
Defrosting
Move the function lever/knob to "DEFROST"
and the air intake lever to "FRESH AIR",
the temperature control lever/knob to the
desired temperature position, and the fan
switch to "HIGH" Moving the temperature
control lever/knob to a higher temperature
position increases defrosting efficiency.
When the windscreen has become clear,
move the fan switch to the desired fan
speed position.
5-17
AIR CONDITIONING SYSTEM
(if equipped)
(ALTO / ALTO K10)
If your vehicle is equipped with air
conditioner, it has an A/C button located on
the heater control panel. The air conditioning
system can be used to provide cooling and
dehumidifying, as described below. To turn
on the air conditioning system, push in the
A/C button and move the fan switch to a
position other than "OFF". An indicator light
will come on when the air conditioning
system is on. To turn off the air conditioning
system, push the A/C button again.
During operation of the air conditioner, you
may notice slight changes in engine speed.
These changes are normal, the system is
designed so that the compressor turns on
or off to maintain the desired temperature.
Less operation of the compressor results in
better fuel economy.

SYSTEM OPERATING INSTRUCTIONS

(ALTO / ALTO K10)
76G-05-047
Normal Cooling (using outside air)
Push in the A/C button, move the function
lever/knob to "VENTILATION", the air
intake lever to "FRESH
temperature control lever/knob to the
"COOL" position, and the fan switch to the
desired fan speed position. Moving the fan
switch to a higher fan speed position
increases cooling efficiency.
If the ambient temperature is high enough
to cause insufficient cooling, use the "Quick
Cooling" as following.
76G-74E
76G-05-049
AIR", the
54