MARUTI SUZUKI Alto Owner's Manual page 51

INSTRUMENT PANEL
Quick Heating (Using recirculated air)
The lever/knob settings are the same as for
normal heating except you move the air
intake lever to "RECIRCULATED AIR". If
you use this heating method for an
extended period of time, the air in the
vehicle can become contaminated and the
windows can become misty. Therefore, use
this method only for quick heating and
change to the normal heating method as
soon as possible.
5-15
TYPE-1 (ALTO)
76G-05-040
TYPE-2 (ALTO/ALTO K10)
76G-05-041
Cool Face/Warm Feet
Move the function lever/knob to "BI-LEVEL"
and the air intake lever to "FRESH AIR",
the temperature control lever/knob to the
desired temperature position, and the fan
switch to the desired fan speed position.
Unless the temperature control lever is in
the fully "COOL" position or fully "HOT"
position, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.
76G-74E
52