System Operating Instructions - MARUTI SUZUKI Alto Owner's Manual

76G-74E
Description of Controls (if equipped)
Function Lever/Knob 1: This lever/knob is
used to select one of the functions
described below:
VENTILATION 2: Temperature-
controlled air comes out of the
76G-05-027
center and side air outlets.
BI-LEVEL 3 : Temperature-
controlled air comes out of the
76G-05-028
floor outlets and cooler air comes
out of the center and side outlets.
When the temperature control
lever is in the fully "COOL"
position or fully "HOT" position,
however, the air from the floor
outlets and the air from the center
and side outlets will be the same
temperature.
HEAT 4: Temperature-controlled
76G-05-029 air comes out of the floor outlets.
HEAT & DEFROST 5 : Temp-
erature-controlled air comes out of
76G-05-030
the floor outlets, the windscreen
defroster outlets, and the side
defroster outlets.
49
DEFROST 6 : Temperature-
controlled air comes out of the
windscreen defroster outlets and
76G-05-031
the side defroster outlets.
Air Intake Lever/Knob 7: This lever/knob
is used to select between circulating outside
air (FRESH AIR) or recirculating inside air
(RECIRCULATED AIR).
Temperature Control Lever/Knob 8 :
(if equipped) This lever /knob is used to
control the temperature of the air that
comes out of the air outlets.
Fan switch 9: This switch is used to turn
on the fan and to select fan speed. Fan
switch has different speed options:-
For Type-1 (Alto)
Four positions-OFF, LOW, MEDIUM and
HIGH.
For Type-2 (Alto / Alto K10)
Five Positions-OFF, LOW, MEDIUM LOW,
MEDIUM HIGH and HIGH.
INSTRUMENT PANEL

SYSTEM OPERATING INSTRUCTIONS

TYPE-1 (ALTO)
TYPE-2 (ALTO / ALTO K10)
76G-05-032
76G-05-033
5-12