Parking Brake; Steering - MARUTI SUZUKI Alto Owner's Manual

INSPECTION AND MAINTENANCE
NOTE:
When measuring the distance between the
brake pedal and floor wall, be sure not to
include any floor covering other than
silencer mat in the measurement.
w w w w w WARNING
If you experience any of the following
problems with your vehicle's brake
system, have the vehicle inspected
immediately by your MARUTI SUZUKI
dealer.
• Poor braking performance
• Uneven braking (Brakes not working
uniformly on all wheels.)
• Excessive pedal travel
• Brake dragging
• Excessive noise
• Pedal pulsation (Pedal pulsates
when depressed.)
9-23

PARKING BRAKE

Ratchet tooth specification "b"
4th- 9th
Lever pull force (1)
200 N (20kg. 44 lbs)
Check the parking brake for proper
adjustment by counting the number of clicks
made by the ratchet teeth as you slowly pull
up on the parking brake lever to the point
of full engagement. The parking brake lever
should stop between the specified ratchet
teeth and the rear wheels should be
securely locked. If the parking brake is not
properly adjusted or the brakes drag after
the lever has been fully released, have the
parking brake inspected and/or adjusted by
your MARUTI SUZUKI dealer.

STEERING

EXAMPLE
76G-09-027
Check the play of the steering wheel by
gently turning it from left to right and
measuring the distance that it moves before
you feel slight resistance. The play should
be between 0 – 30 mm (0.0 – 1.2 in).
Check that the steering wheel turns easily
and smoothly without rattling by turning it
all the way to the right and to the left while
driving very slowly in an open area. If the
amount of free play is outside the
specification or you find anything else to be
wrong, an inspection must be performed by
your MARUTI SUZUKI dealer.
76G-74E
76G-09-028
106