Timer - Daewoo DTM-28 Series Instruction Manual

SOUND CONTROL
• Press the MENU button.
• Place the selection bar to the Sound with UP/DOWN button.
• Press the RIGHT button to call up Sound menu.
• Select the required function by moving the selection bar ith the UP /
DOWN buttons.
• Press the RIGHT button to call up the each sub-menus.
Equalizer :
There are four possible choice considering your preference:
"Favourite, Music, Speech, Normal".
In Favourite mode you can adjust a level at each frequency band with
LEFT/RIGHT button .
Effect :
There are four possible choice considering your preference:
1. Available only for Dolby Virtual option.
Normal->Spatial->Panorama->Dolby Virtual
2. Available only for Non-Dolby Virtual option.
Normal->Spatial->MDB
Smart Sound Selection
When you press the sound effect button (
easily one of the following:
1. Available only for Dolby Virtual option.
Normal->Favourite->Music->Speech->Spatial->Panorama->Dolby Virtual->
Normal...
2. Available only for Non-Dolby Virtual option.
Normal->Favourite->Music->Speech->Spatial->MDB
Balance :
Balance the loudness of the left and right speaker .
SOUND MODE
There may be cases of stereo broadcasts where excessive noise will be
heard due to weak incoming signal.
You may be able to eliminate this noise by selecting the MONO mode.
Press the Sound Mode (
STEREO.
Then the "MONO" colour will be changed in Red.
Pressing this button again will change it back to stereo.
During a bilingual programme transmission, pressing the Sound Mode but-
ton will change the language to the second channel (DUAL
Pressing again will change it back to the main channel (DUAL

TIMER

SETTING THE CLOCK
• Position the selection bar to the Timer in the Main Menu.
• Press the RIGHT button.
• Place the cursor to Hour / Minute with LEFT /RIGHT button.
• Set the hour / minute with the UP/DOWN buttons.
• Place the cursor to Clock with LEFT/RIGHT button and then press the
Menu button to compelet.
Note that if you turn the TV off with MAIN POWER (ON/OFF) button, the
clock setting is lost and must be reset if necessary.
) repeatedly, you can call up
) button to change to MONO from
II ).
I
).
8
Sound
Equalizer
Effects
Balance
Position Access
Return
M
Sound
100
Equalizer
300
Effects
1 K
Balance
3 K
10K
Favourite
Music
Speech
Normal
Position Adjust
Return
M
Sound
Equalizer
Normal
Effects
Spatial
Balance
Panorama
Dolby virtual
Position Return
M
Sound
Equalizer
Effects
Balance
L/R 00