Inserting Batteries Into The Remote Control Unit; Aerial Connection; Mains Connection - Daewoo DTM-28 Series Instruction Manual

INSTALLATION
If the set is moved or placed in a different direction, the MAIN POWER button
must be switched off for at least 15 minutes in order to take out a colour strain
on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover.
Insert the batteries supplied (two 1.5V, type AAA).
Make sure that the polarity matches with the (+) and (-) marks inside of the bat-
tery compartment.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most
important.
When using an outdoor aerial, it is usually connected to the set by means of 75
ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with 220V - 240V / 50Hz AC.
3