Antennas With Two Sets Of Leads; Connecting A Cable System - Daewoo DTQ 25G1FC Instruction Manual

Antennas with two sets of leads

You might have two sets of leads from your antenna system, especially if you have one
antenna for VHF signals and one antenna for UHF signals.
If your antenna system has both a coaxial lead and twin 300-ohm leads, you must
obtain a combiner (available at your local electronics store). Press or screw the coaxial lead
onto the combiner; place the twin leads underneath the screws on the combiner and tighten
the screws. Press the cable from combiner onto the antenna terminal on the back of your
TV.
If your antenna system has two sets of twin 300-ohm leads, you must obtain a combiner
(available at your local electronics store). Place one set of twin leads underneath the screws
on the combiner and tighten the screws. Do the same with the other set of twin leads. Press
the cable from the combiner onto antenna terminal on the back of your TV.

Connecting a cable system

If your cable set-up is not described below, please contact your cable company for more
information.
Chapter 1 : Connecting an Antenna/Cable and VCR to Your TV
If your cable system does not require the use of
a cable box, simply press or screw the incoming
cable onto the antenna terminal on the back your
TV.
4