Selecting The Input Source; Using The Direct Button On The Remote Control; Using On-Screen Menu - Daewoo DTQ 25G1FC Instruction Manual

Selecting the Input Source

Using the direct button on the remote control.

Press the TV/VIDEO button on the remote control to select the input source you wish to
view : TV, External Video 1 or External Video 2.
Each time you press the TV/VIDEO button, Video1, Video2 or channel number will be dis-
played to show which signal source you are watching.
Note) Your TV will display a blue screen whenever it is receiving a weak signal from a VCR.

Using On-Screen Menu

1. Press MENU button on the remote
control (or on the TV) to display main
menu.
2. Press WCHV button on the remote
control (or on the TV) repeatedly to
select 'Setup' and press CVOLB
button on the remote control (or on
the TV).
3. Press WCHV button on the remote
control (or on the TV) repeatedly to
select 'Input' and press CVOLB but-
ton on the remote control (or on the
TV)
4. When you select input source correct-
ly, press menu button on the remote
control (or on the TV) repeatedly to
exit on-screen menu.
5. Even if you don't press any button on
the remote control (or on the TV) the
on-screen menu disappear after a few
second.
13
Chapter 3 : Operating Your TV
TV Video 1
Ch 11
1
Setup
Video
Audio
Timer
Function
L Prev WV Move CB Select
2
Setup
Auto Program
Edit Program
Favorite Ch
Language
Captions
Power Restore
Input
Video 2
L Prev WV Select CB Adjust
3
Setup
Language
Captions
Power Restore
Input
Video 1
TV
Video 1
Video 2
AND-BY CH VOL MENU
AND-BY CH VOL MENU
AND-BY CH VOL MENU
AND-BY CH VOL MENU