Programming Your Tv's Channel Memory; Source Selection; Auto Programming Function - Daewoo DTQ 25G1FC Instruction Manual

Programming Your TV's Channel Memory

Your TV automatically memorizes the channels you can receive. Once channels are memorized, you
can scan through them using WCHV buttons on the remote control or on the TV.

SOURCE Selection

1. Press menu button on the remote control or
on the TV to display the main menu.
2. Press WCHV buttons on the remote control
or on the TV to select 'Auto Program' and
press CVOLB buttons on the remote control
or on the TV.
3. Press WCHV buttons on the remote control
or on the TV to select 'Source' and press
CVOLB buttons on the remote control or on
the TV. If you connected a antenna to your
TV, select 'Air', if you connected a cable
system, select 'CABLE'.

Auto Programming Function

1. Select Auto Program following step 2 and 3
in "SOURCE selection" above.
2. Press CVOLB button an the remote control
or on the TV to start auto programming pro-
cess. The TV will automatically cycle
through all the TV or CABLE channels on
the mode selected by the Air/Cable mode,
and store active channels in the channel
memory
3. Press MENU button on the remote control or
on the TV repeatedly to exit on-screen menu when channel programming is completed. This pro-
cess takes a few minutes.
4. Even if you don't press any button, the on-screen menu disappear after a few second.
1
Setup
Video
Audio
Timer
Function
L Prev WV Move CB Select
2
Setup
Auto Program To Press
CB
Edit Program
Favorite Ch
Language
Captions
Power Restore
Input
L Prev WV Select CB Adjust
3
Auto Prog.
Source Air
Auto Program
L Prev WV Select CB Adjust
2
Auto Prog.
Source
To Program
Auto Program CB
L Prev WV Select CB Adjust
Chapter 3 : Operating Your TV
TAND-BY CH VOL MENU
TAND-BY CH VOL MENU
AND-BY CH VOL MENU
AND-BY CH VOL MENU
14