Connecting Case Components - Packard Bell ixtreme M5801 Service Manual

Connecting Case Components

After you have installed the motherboard into a case, you can begin connecting the motherboard components.
Refer to the following:
1 Connect the CPU cooling fan cable to CPU_FAN.
2 Connect the standard power supply connector to ATX1
3 Connect the auxiliary case power supply connector to ATX_12V.
4 Connect the case switches and indicator LEDs to the F_PANEL.
5 Connect the system cooling fan connector to SYS_FAN.
Connecting 24-pin power cable
24-pin power cable
Users please note that when installing 24-
pin power cable, the latche of power cable
falls on the left side of the ATX_POWER1connector
latch, just as the picture shows.
85