Packard Bell ixtreme M5801 Service Manual page 29

uAHCI Port1 /Port2 /Port3 /Port4 /Port5 /Port6
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
Press <Enter> to display the IDE submenu:
CMOS Setup Utility-Copyright( C ) 1985-2010, American Megatrends, Inc.
AHCI Port 1
----------------------------------------- ------------------------
Device :
Vendor:
Size:
----------------------------------------- ------------------------
S.M.A.R.T
↑↓→←：Move Enter：Select +/-/：Value F10：Save & Exit Setup
F1：General Help
S.M.A.R.T. (Auto)
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system is a diagnostics technology that
monitors and predicts device performance. S.M.A.R.T. software resides on both the disk drive and the host
computer.
32Bit Data Transfer (Enabled)
Use this item to enable or disable 32Bit Data Transfer.
Press <Esc> to return to the Standard CMOS Setup page.
Halt On (All, But Keyboard)
This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to
select which types of errors in the POST are sufficient to halt the system.
Press <Esc> to return to the main menu setting page.
AHCI Port 1
Hard Disk
ST3320418AS
320.0GB
Enabled
F9：Load Default Settings
Item Help
S.M.A.R.T stands for
Self-monitoring,
Analysis and Reporting
Technology.
Esc： Exit Without Saving
23