Integrated Peripherals - Packard Bell ixtreme M5801 Service Manual

Integrated Peripherals

his page sets up some parameters for peripheral devices connected to the system.
T
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Onboard SATA Controller
Onboard SATA Mode
Onboard USB Controller
Legacy USB Support
USB Storage Emulation
Onboard Graphics Controller
Onboard Audio Controller
Onboard LAN Controller
Onboard LAN Option ROM
↑↓→←：Move Enter：Select +/-/：Value F10：Save & Exit Setup
F1：General Help
OnBoard SATA Mode (AHCI)
Use this item to select the onboard SATA mode.
OnBoard SATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
OnBoard USB Controller (Enabled)
Use this item to enable or disable the use of USB controller.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect
the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
USB Storage Emulation (Auto)
If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced
FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).
Onboard Graphics Controller (Enabled)
This item enables or disables the onboard graphics controller.
Onboard Audio Controller (Enabled)
This item enables or disables the onboard audio controller.
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
Onboard LAN Option ROM (Disabled)
This item enables or disables the onboard LAN option ROM function.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enabled
AHCI
Enabled
Enabled
Auto
Enabled
Enabled
Enabled
Disabled
F9：Load Default Settings
Item Help
Options
Enabled
Disabled
Esc： Exit Without Saving
29