Table of Contents
Advertisement
SATA 1~6: Serial ATA connectors
These connectors are used to support the new Serial ATA devices for the highest date transfer rates (3 Gb/s ),
simpler disk drive cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA
interface. But maintains register compatibility and software compatibility with Parallel ATA.
Pin
SPDIF_OUT1: SPDIF out header(Option)
This is an optional header that provides an S/PDIF (Sony/Philips Digital Interface) output to digital multimedia
device through optical fiber or coaxial connector.
Pin
F_USB1~4: Front Panel USB headers
The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, some computer
cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to
connect the front-mounted ports to the motherboard.
Pin
Signal Name
1
Ground
3
TX-
5
RX-
7
Ground
Signal Name
1
+5VA
2
Key
3
SPDIF
4
GND
Signal Name
1
USBPWR
2
USBPWR
3
USB_FP_P0-
4
USB_FP_P1-
5
USB_FP_P0+
6
USB_FP_P1+
7
GND
8
GND
9
Key
10
USB_FP_OC0
Pin
Signal Name
2
TX+
4
Ground
6
RX+
-
-
Function
5V analog Power
No pin
SPDIF digital output
Ground
Function
Front Panel USB Power
Front Panel USB Power
USB Port0 Negative Signal
USB Port1 Negative Signal
USB Port0 Positive Signal
USB Port1 Positive Signal
Ground
Ground
No pin
Overcurrent signal
95
Hide quick links:
Advertisement
Table of Contents
