Names And Functions Of Parts; Operating Status Leds - Panasonic FP2 Manual

FP2−CCU
2.1

Names and Functions of Parts

2.1.1 Names and Functions of Parts

Operating status LEDs

1
This displays the operating status of the unit, such as communication conditions
and error/alarm situations.
COM.1 port (RS232C) and COM.2 port (RS232C)
2
These ports are used to connect the RS232C connector of an RS232C device such
as a personal computer or display panel, using a shielded cable.
Transmission format setting switch
3
These switches are used to set the transmission speed (baud rate) and character
bit for the COM.1 and COM.2 ports. The values set by these switches are
automatically reflected when the power supply is turned on. For other information
on the transmission format, please see page 3 − 3.
Backplane connector
4
This connector is used to connect the Computer Communication Unit to the
backplane.
Tip
The settings of the transmission format setting switches become effective
when the power supply is turned on.
Front
Names and Functions of Parts
2.1 Names and Functions of Parts
Back
2 − 3