FPI U31 Owners & Installation Manual page 12

INSTALLATION
5) Place the Middle Left Log C)02-56 on the two pins as
shown.
C)02-56
Logs A)02-43, C)02-56, and B)02-45 in position
6) Place the Left Top Log D)02-46 on the pin on Log
C)02-56 and on top of the cutout on Log A)02-43.
D)02-46
C)02-56
Pin
12
7) Place the notch in Center Log E)02-47 over Log B)02-
45 and across the cutout on Log A)02-43.
8) Position notch in Front Right Log F)02-48 on Log
E)02-47 and push the bottom right edge against the
bracket on the burner tray and the front edge of the
rear burner.
A)02-43
Cutout
E)02-47
Notch
Logs D)02-46 and E)02-47 in position.
Notch
F)02-48
B)02-45
FPI U31-2 Gas Fireplace Insert
A)02-43
B)02-45
Cutout
Bracket