Samsung SNP-1000A User Manual page 78

10X PTZ Network Camera SNP-1000A
AWC:
Set up the lighting to the objects and corrects the right colour
temperature to that of a white object. Camera works under the
setup conditions. For the most appropriate condition under the
current illumination, capture the white paper and then change the
mode into AWC. Press the Enter key and then AWC Start will be
displayed. When the adjustment is completed after pressing the
Enter key for AWC Start, go to the upper menu. When conditions
change, adjust the white balance function again.
Manual
Fine tuning is possible through this manual control mode. Select
the colour temperature and increase or decrease the Red or Blue
values to shift the colour of the object.
- Red : Red Gain can be changed.
- Blue : Blue Gain can be changed.
Note
74
White Balance may not function properly under the
following conditions.
When the colour temperature surrounding the
object is very high. (e.g. clear sky, sunset)
When it is dark around the object.
When the camera is pointing towards a fluorescent
lamp directly or when lighting conditions change a
lot.