Table of Contents
Advertisement
10X PTZ Network Camera SNP-1000A
camera settings. Default setting is OFF.
OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7
Days enables the Auto Refresh operation in the interval of the
selected days. Auto Refresh takes less than 10 seconds. The
message "Auto Refresh" disappears after finishing the operation.
5.7. Status
The status of PTZ camera setting is displayed.
CAM MODEL= 10NC
CAM VERSION= 4.6
DOME VERSION= 1.00
CON PROTOCOL=SAMSUNG TW
DOME ID= 001
CONTROLLER= Duplex-19200
96
Camera Model
Camera S/W Version
Control Board S/W Version
Protocol Setup
Dome Camera ID
Communication Mode Setup
Advertisement
Table of Contents
